Having a compact yet functional accessory to hold your coins and cards is essential. Instead of buying one, why not try making your own DIY coin purse card holder? Not only is it a fun and creative project, but it also allows you to customize the design according to your preferences. Go through the steps to create your very own stylish and practical coin purse card holder.
Materials Needed:
- Fabric of your choice (cotton, canvas, or denim works well)
- Zipper (preferably 5-7 inches long)
- Sewing machine or needle and thread
- Scissors
- Pins
- Ruler
- Iron
- Optional: Decorative elements such as buttons, beads, or patches
Step 1: Measure and Cut the Fabric
Start by measuring and cutting your fabric into two rectangles. The dimensions depend on how big you want your coin purse card holder to be, but a good starting point is around 6×4 inches for each rectangle. Make sure to leave some seam allowance around the edges.
Step 2: Prepare the Zipper
Place your zipper face down on the edge of one fabric rectangle, aligning the top edge of the zipper with the top edge of the fabric. Pin it in place and sew along the edge using a zipper foot attachment on your sewing machine. If you’re hand-sewing, use a backstitch for durability. Repeat the same process for the other fabric rectangle.
Step 3: Attach the Second Fabric Rectangle
Take the second fabric rectangle and place it right side down on top of the zipper, aligning the edges. Pin it in place and sew along the edge just like before. When you’re done, you should have a sandwich with the zipper in the middle and both fabric rectangles attached on either side.
Step 4: Sew the Sides
Now it’s time to sew the sides of your coin purse card holder. Start by unzipping the zipper halfway so you can turn the fabric right side out later. Fold the fabric so that the right sides are together and the zipper is in the middle. Pin the sides together and sew along the edges, making sure to leave a small opening at the bottom for turning.
Step 5: Turn It Inside Out
Once you’ve finished sewing the sides, trim any excess fabric and clip the corners to reduce bulk. Then, carefully turn the coin purse card holder inside out through the opening at the bottom. Use a pencil or chopstick to gently push out the corners for a crisp finish.
Step 6: Close the Opening
After turning the coin purse card holder right side out, iron it flat to remove any wrinkles. Then, fold the raw edges of the opening inside and press them with an iron. You can either hand-stitch the opening closed using a slip stitch or topstitch along the edge for a decorative finish.
Step 7: Add Decorative Elements (Optional)
Finally, if you want to personalize your coin purse card holder, feel free to add decorative elements such as buttons, beads, or patches. Get creative and make it uniquely yours!